VisibleDust Dust Snapper Ultra-Clean Surface for Cleaning
$65.00 inc. GST
or 4 payments of $16.25 with Wizit learn more
- Diameter: approx. 21 cm
- Safe Place to Rest Camera/Lens on
- Uses Magnetic Action to Remove Dust
- Made from a Polymer Material
- Easy to Clean Under Running Water
Colour may vary
In Stock 🇦🇺
Dust Snapper provides an Ultra-Clean surface for critical cleaning. Using ionic and enhanced magnetic action of Dust Snapper, one can provide an Ultra-clean camera/lense environment. The combined ionic and magnetic action of Dust Snapper™ removes and locks the dust particles from the contact area of the camera or lens.
Most camera bodies or lenses are made of composite materials which are prone to dust and particles attraction when placed on ordinary surfaces. These contaminants once attached to the body of the camera, find their way inside the camera or lens, eventually landing on the image sensor. In order to combat this problem, VisibleDust has created a special polymer pad with dual ionic and magnetic action called DustSnapper.
Dust Snapper has a higher affinity to dust than the camera body or lens itself. Once a clean DustSnapper has been placed under the camera body or lens, it creates a clean environment at the same time using its dual ionic and magnetic action to remove harmful contaminants away from the lens or body of the camera. This creates a safe and mini-clean environment for camera or lens to be placed on. DustSnapper™ is easy to clean, simply place it under running water and let it air-dry or blast it with canned air to rid of contaminants. One added bonus DustSnapper provides a smoother surface in addition to a clean environment to prevent shock or dent. A clean DustSnapper™ could be used as mini clean environment for critical cleaning. Finally, DustSnapper is scientifically made to act as a mini clean environment and should not be mistaken for ordinary plastic or silicon pads.
- Place your camera/lens on the Pad and the ionic and magnetic action generated will remove the contaminants.
- Store the Visible Dust Snapper in a clean environment
- Clean Under Running Water and allow
Visibledust sensor cleaning solutions and swabs are calibrated to work together to produce optimal and safe results. Please DO NOT USE alternative solutions with our swab. A simple grain of quartz that is found in cheaper solutions are enough to produce an expensive scratch on the low pass filter. Our solutions are manufactured to the highest standard of quality that is practiced in pharmaceutical industries.
Visibledust solutions are calibrated for NORMAL evaporative rates:
- to keep the swab moist at all time to reduce the risk of scratch
- to increase the cleaning power, less swabbing more economical
- to reduce friction by being moist all time during swabbing
The potential risk of FAST evaporative solutions used as sensor cleaning are the following:
- an increase in the risk of damage and stress to sensor coating by using a premature dry swab
- a great reduction in cleaning power by shortening the contact time between contaminants and solution due to the increased evaporation rate of the solution
- increase in friction by using a premature drying swab, resulting in static charge build-up leading to an even greater dust accumulation on the sensor
Our cleaning liquids are intended to be placed on the swab first, so the concern for liquid seeping through the sensor is not valid or accurate. On the other hand, the disadvantages of a generic brand or FAST evaporative liquid used for sensor cleaning may in fact may cause damage to the sensor by requiring repeat swabbing and is not recommended.
VisibleDust FlexoDome Sensor Cleaning Accessory for Panasonic and Olympus Micro 4/3 Cameras$79.00 inc. GST Add to cart
VisibleDust FlexoDome Sensor Cleaning Accessory for Nikon F-Mount Cameras$79.00 inc. GST Add to cart
AVAILABLE ON BACKORDER
VisibleDust Arctic Butterfly 724X Super Brite Sensor Brush$209.00 inc. GST Add to cart
VisibleDust CurVswab Handle Set$29.00 inc. GST Add to cart