VisibleDust Green Ultra MXD-100 1.3x Vswabs (12 Pack) with bonus CurVswab and Corner Swabs

Original price was: $85.00.Current price is: $72.25. inc. GST

or 4 payments of $18.06 with Wizit learn more

  • The patented mini-channels, with contour, provide an even saturation of the sensor cleaning swab surface
  • The patented V shape of the sensor cleaning swab results the best maneuverability inside the digital camera chamber
  • A unique fabric folding system is tailored for cleaning a delicate sensor without leaving streaks, pooling or abrasions
  • The MXD-100 Green Corner Swabs™ have been tailored specifically to remove dust build-up in those hard to reach areas
  • Compatible with VDust Plus™, Smear Away™, Sensor Clean™, CMOS Clean™ sensor cleaning liquid solutions
  • CurVswab™ handle creates an optimal surface contact between the swab fabric and sensor preventing streak lines associated with the regular swab handle

THIS ITEM SHIPS FREE WITH TRACKING

EOFY Sale

Green Ultra MXD-100 Set Sizes
1.3x

In Stock 🇦🇺

VisibleDust sensor cleaning swabs and solutions are calibrated to work together to produce optimal and safe results. Please DO NOT USE alternative solutions with our swabs.

Product Code: VD2863173 Barcode: 827912060164 SKU: VD2863173 Category:

Description

The VisibleDust Green Ultra MXD-100 1.3x Vswabs (12 Pack) swabs are an excellent means for thorough sensor wet cleaning of Micro Four Third cameras. They are compatible with all cleaning solutions from the VisibleDust range.
The trapezoidal VSwabs are a further development of the square swabs. The special shape of the swab offers several advantages. It makes maneuvering in a narrow camera housing easier. At the same time, the risk of stripping dust particles from the housing walls, which could then fall on the sensor, is reduced. The cleaning performance is also improving. Due to the trapezoidal shape, the pressure is evenly distributed over the entire cleaning surface of the swab. This results in a more even, streak-free cleaning of the sensor surface.

These sensor cleaning swabs, with their unique fabric folding system, are specially tailored for cleaning your delicate sensor without leaving streaks, pooling or abrasions. The mini-channels, with contour, provide an even saturation of the swab’s paddles surface while preventing pooling and vertical flow at the edge. This reduces streaks associated with traditional flat surface swabs. The mini-channels also provide the extra reservoir to absorb the excessive liquid and prolonging the moisture life of the swab during the sensor cleaning process. Compatible with Sensor Clean, Smear Away, CMOS Clean or VDust Plus sensor cleaning liquids.

MXD-100 Green Vswabs®  and Corner Swabs™ are compatible with:

  • VDust Plus™ Formula liquid sensor cleaning solution
  • Smear Away™ liquid sensor cleaning solution
  • Sensor Clean™ liquid sensor cleaning solution
  • CMOS Clean™ liquid sensor cleaning solution
  • Refer to your camera’s manual on how to expose the sensor.
  • Brush the sensor surface with Arctic Butterfly® Sensor Brush®. Alternatively, use Zee Pro™ or Zeeion® anti-static bulb blower to remove dry contaminants.
  • Add 2-4 drops of Sensor Clean™ on the fabric of MXD-100 Green Vswab™.
  • Wait to allow for even saturation of the swab (can be calibrated from a few seconds to 30 seconds depending on environmental conditions). Do not allow the swab to dry out.
  • Using Vswab™, wipe across the sensor with gentle pressure once, in a single smooth motion. If it is necessary, turn Vswab over on the other side and repeat. Ensure you wipe in the same direction both times.
  • Discard the swab after a single use.
  • Allow the sensor to dry out completely. If needed, use the Arctic Butterfly® Sensor Brush® for complete cleaning.
  • Proceed with checking the image.
  • Repeat if necessary.

Wet Clean Manual

Visibledust sensor cleaning solutions and swabs are calibrated to work together to produce optimal and safe results. Please DO NOT USE alternative solutions with our swab. A simple grain of quartz that is found in cheaper solutions are enough to produce an expensive scratch on the low pass filter. Our solutions are manufactured to the highest standard of quality that is practiced in pharmaceutical industries.

Visibledust solutions are calibrated for NORMAL evaporative rates:

  1. to keep the swab moist at all time to reduce the risk of scratch
  2. to increase the cleaning power, less swabbing more economical
  3. to reduce friction by being moist all time during swabbing

The potential risk of FAST evaporative solutions used as sensor cleaning are the following:

  1. an increase in the risk of damage and stress to sensor coating by using a premature dry swab
  2. a great reduction in cleaning power by shortening the contact time between contaminants and solution due to the increased evaporation rate of the solution
  3. increase in friction by using a premature drying swab, resulting in static charge build-up leading to an even greater dust accumulation on the sensor

Our cleaning liquids are intended to be placed on the swab first, so the concern for liquid seeping through the sensor is not valid or accurate. On the other hand, the disadvantages of a generic brand or FAST evaporative liquid used for sensor cleaning may in fact may cause damage to the sensor by requiring repeat swabbing and is not recommended.

Reviews

There are no reviews yet.

Be the first to review “VisibleDust Green Ultra MXD-100 1.3x Vswabs (12 Pack) with bonus CurVswab and Corner Swabs”


VisibleDust Green Ultra MXD-100 1.3x Vswabs (12 Pack) with bonus CurVswab and Corner Swabs Swabs - 1.3 (Micro Four-Third) | Visible Dust Australia |
VisibleDust Green Ultra MXD-100 1.3x Vswabs (12 Pack) with bonus CurVswab and Corner Swabs
Original price was: $85.00.Current price is: $72.25. inc. GST