VisibleDust SwabLight DSLR Sensor Cleaner Brushes & Accessories | Visible Dust Australia |
VisibleDust SwabLight DSLR Sensor Cleaner Brushes & Accessories | Visible Dust Australia | 2
VisibleDust SwabLight DSLR Sensor Cleaner Brushes & Accessories | Visible Dust Australia | 3
VisibleDust SwabLight DSLR Sensor Cleaner Brushes & Accessories | Visible Dust Australia | 4
VisibleDust SwabLight DSLR Sensor Cleaner Brushes & Accessories | Visible Dust Australia | 5

VisibleDust SwabLight DSLR Sensor Cleaner

$49.00 inc. GST

AVAILABLE ON BACKORDER

or 4 payments of $12.25 with Wizit learn more

Button Battery Warning

  • A better and firm swab grip for proper movement and pressure for streak-free results.
  • A better swab positioning on the sensor to easily master edge-to-edge sensor cleaning.
  • A better and clear view of the sensor surface during sensor cleaning.

Due to high demand, this product is sold out and available on backorder. Please allow 2-3 weeks to receive your item.

Notify me when stock is available

Product Code: VD1259888 Barcode: 626570613282 SKU: VD1259888 Category:

Description

SwabLight is a special clip-on light for use with the VisibleDust Sensor Swabs.

For many owners of an SLR camera, cleaning the camera sensor is a sensitive issue. This small clip-on light from VisibleDust greatly facilitates the wet cleaning of the camera sensor by ideally illuminating the chamber to be cleaned. In addition, the SwabLight acts as an extended, ergonomic handle for improved handling of the sensor swab.

Since the sensor of a digital camera is buried deep inside the chamber wall and covered with a dark surface to prevent lights from bouncing off, therefore this is a very difficult task for the operator to position the swab exactly along the sensor edges, avoiding contamination by accidental contact with chamber walls. Most swab handles are made thin with little grip to be held firmly in hands reducing proper manipulation. A better grip on the swab handle results in more uniform pressure and movement producing streak-free cleaning. SwabLight™ from VisibleDust greatly overcomes these deficiencies by having:

  1. A better and firm swab grip for proper movement and pressure for streak-free results.
  2. A better swab positioning on the sensor to easily master edge-to-edge sensor cleaning.
  3. A better and clear view of the sensor surface during sensor cleaning.

Above all, using SwabLight™ from VisibleDust lessens the fear associated with self sensor cleaning, greatly enhances efficiency and results in reducing the number of swabs used per sensor cleaning session leading to more savings. SwabLight™ takes you to a completely higher professional level and fun sensor cleaning experience.

Button Battery Warning

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

SwabLight™

  1. Please remove battery safety paper by turning the switch cap counter clockwise.
  2. Insert the Vswab® handle all the way through the swab cavity.
  3. Apply appropriate liquid on the swab (refer to Vswab® instruction by VisibleDust).
  4. Turn the SwabLight™ on, adjust focusing beam, proceed with cleaning.

Visibledust sensor cleaning solutions and swabs are calibrated to work together to produce optimal and safe results. Please DO NOT USE alternative solutions with our swab. A simple grain of quartz that is found in cheaper solutions are enough to produce an expensive scratch on the low pass filter. Our solutions are manufactured to the highest standard of quality that is practiced in pharmaceutical industries.

Visibledust solutions are calibrated for NORMAL evaporative rates:

  1. to keep the swab moist at all time to reduce the risk of scratch
  2. to increase the cleaning power, less swabbing more economical
  3. to reduce friction by being moist all time during swabbing

The potential risk of FAST evaporative solutions used as sensor cleaning are the following:

  1. an increase in the risk of damage and stress to sensor coating by using a premature dry swab
  2. a great reduction in cleaning power by shortening the contact time between contaminants and solution due to the increased evaporation rate of the solution
  3. increase in friction by using a premature drying swab, resulting in static charge build-up leading to an even greater dust accumulation on the sensor

Our cleaning liquids are intended to be placed on the swab first, so the concern for liquid seeping through the sensor is not valid or accurate. On the other hand, the disadvantages of a generic brand or FAST evaporative liquid used for sensor cleaning may in fact may cause damage to the sensor by requiring repeat swabbing and is not recommended.

Button Battery Warning

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

Reviews

There are no reviews yet.

Be the first to review “VisibleDust SwabLight DSLR Sensor Cleaner”


Related products

VisibleDust SwabLight DSLR Sensor Cleaner Brushes & Accessories | Visible Dust Australia |
VisibleDust SwabLight DSLR Sensor Cleaner
$49.00 inc. GST